LED Closet Lights Motion Sensor Puck Light, USB Rechargeable Battery Powered Puck Lights with Remote Control, Dimmable…

Make sure this fitsby entering your model number.
【Excellent Sensor Night Light】– 6 pure white LEDs with 60LM ( 6 Lights in 1 Pack ).With ”AUTO” Mode, it will light up once detecting movement within 10ft and Auto-off after about 20 seconds if no motion detected. The wireless sensor night light as a visual aid to avoid potential obstacles in the darkness. Smart LED step lights are convenient and safe.
【USB Rechargeable Battery】– The under cabinet lighting built in 600mAh rechargeable battery.It takes 2 hours to fully charge.After full charged, it can be last about 7-20 days at ”Auto” Mode, it can be last about 6-24 hours at ”ON” Mode. It can charged by any USB devices such as computers, power banks,adapters,etc. Long-lasting lithium battery and long time illumination of energy saving is good for your family.
【Dimmable and Timing】– The dimmable closet light come with a remote. In “ON” mode, the light will turn on all the time, and it can works with the remote control. 4 Levels of brightness: 10%, 40%, 80%, 100%. And stepless dimming by pressing the +/- button to Increase/Reduce brightness by remote control. The light will auto-off after 10, 30, 60 or 120 mins by the Timing function. ( Note: the remote control do not work for “Auto Mode”. )
【 Easy to Install 】– The rechargeable step light is convenient to install in seconds! It has 2 installation ways. ① Directly attach to any ironwork surface with the built-in magnet. ② Use the metal sheet to stick on any flat surface. You can put night lights wherever you want. No hammers, drills, or tools required, easy to install and remove.
【Multiple Application LED Indoor Lights】– Lightbiz motion sensor night light is a friendly nighttime assistant, which is good for young children and many people who are afraid of the dark. LED wall lights indoor are widely used for bedroom, baby room,counter, kitchen, garage, gun safe, basement, closet, stairs, hallway, cupboard, etc.(Before using the adhesive, please wipe the area where you need to paste it to avoid dust, water stains, etc., otherwise the bonding strength will be affected!)