Sipery Floating Shelf Brackets, 4Pcs Hidden Shelf Support Brackets 3 inch Depth Concealed Blind Shelf Support with…

Specification
Package: 4Pcs 3 inch Floating Shelf Bracket with 8Pcs Anchor Screws
Material: Cold rolled iron casting, nickel plated surface
Color: Silver
Shaft Length: 74mm / 3 inch
Shaft Diameter: 10mm / 0.4 inch
Rectangle Base Size: 70x14x4mm / 2.8×0.55×0.16 inch (L*W*T)
Screws Size: 5x60mm / 0.2×2.4 inch (D*L)
Anchor Size: 7x60mm / 0.28×2.4 inch (D*L)
Fit for Shelves Thickness: 20-30mm (approx.)

Installation:
1. You should use level to mark cross on the wall to make sure you drill the holes in the right place, the distance between both holes is 42mm / 1.65 inch.
2. Drill two holes into the marks on the wall, make sure the hole if fit the screws you mounted.
3. Screw the shelf bracket into the wall by two screws.
4. Drilling holes(0.4” Diameter & 3” Depth) in the side of the shelf, make sure bracket rod fit into the holes.
5. Then simply mount the shelf to bracket rod, level it and hold it securely into place.
– For a flush install, please use a chisel or router to make a channel about 0.16″ deep to hide the mounting bracket.
– Each bracket holds 15lbs. For heavier shelves please add extra brackets to distribute the weight.

The bearing capacity of the bracket depends on:
– Mount on wood or concrete wall
– The quality and length of screws used
– The size and weight of the bracket, and weight distribution on the shelf

Sipery Service
1. Customer service: We guarantee your 100% satisfaction! If within 30 days you are not satisfied with our products, please feel free to contact us. We will refund or replace your order to provide a best solution!
2. Search Sipery: If Wanna more Tools & Home Improvement Accessories, just search “Sipery”.
3. Knidly Note: Please allow 1-2cm errors due to manual measurement, thank you for your understanding!

Make sure this fits by entering your model number.
Easy to Install – 4 Set 3 inch Hidden Shelf Brackets, We have provided screws, anchors and brackets for your instant and perfect installation, you can DIY your own floating shelves effortlessly.
Material – Hidden shelf support made of Solid cold rolled iron casting, nickel plated surface, Good load bearing and not easy to break, these will hold up your shelves without fall down.
Floating Design: These concealed shelf brackets create the illusion that a shelf is floating and the lack of visible hardware supporting the shelf grants you a wider range of visual variety and options.
DIY Your Wall – DIY your wall with these shelf brackets on backdrop wall in your bedroom, kitchen, laundry room, study room, farmhouse, office, cafe, restaurant, store and more.
Advice – We recommend mounting to a stud on your wall for maximum support. Each bracket holds 15lbs, place some decorations and some light items. For heavier shelves please add extra brackets to distribute the weight.
[amz_corss_sell asin=”B07S9MDL3R”]