LUORNG 30PCS 5×20 Plastic Locking Shelf Support Pegs Locking Shelf Pins Cabinet Shelf Clips Locking Shelf Pegs Fits for…

Pin diameter: 5mm/0.2in
Adapter hole diameter: 5mm/0.2in
material: plastic
Color: transparent
Quantity: 30PCS

For supporting and locking 3/4″ thick shelves
Note: Please confirm that the shelf thickness is less than 20mm/0.79in before purchasing
For a snug fit, the hole diameter should be equal to or slightly smaller than the pin diameter (slightly smaller or equal to 5mm/0.2in)

how to use
1. Use an electric drill to make holes, please use a 5mm/0.2in drill bit.
2. Place the bulkhead tip in the hole.
(Reminder: If the hole diameter is larger than the diameter of the shelf pin, you can wrap a circle with transparent tape, and then put the shelf pin into the hole).
3. Place the baffle on the baffle tip.

Make sure this fits by entering your model number.
Furniture accessories transparent partition. Pin diameter: 5mm / 0.2in, used to support and lock shelves up to 3 / 4 inch thick. 20mm / 0.79in thick shelf; Note: please confirm that the shelf thickness is less than 20mm / 0.79in before purchase.
PC plastic material: transparent appearance material, not easy to wear and deformation, not easy to break, long service life. Excellent load-bearing, smooth edge, no burr, good plastic toughness, not easy to deform the connection, strong load-bearing capacity and not easy to fracture.
Easy to use: it only needs manual installation or disassembly, which is a good choice for DIY; Easy release: simply press the spring clip to remove the shelf.
Applicable to a variety of scenes: furniture cabinet, wardrobe, shoe cabinet, furniture connecting board and other scenes. It can be installed on the furniture loaded with objects such as wardrobe, cupboard, shoe cabinet, storage cabinet and desk cabinet. The installation is stable and not easy to fall off. It provides excellent bearing capacity for home and is convenient for daily use.
Package content: 30 transparent long plate holders. In order to obtain the tight fit effect, the hole diameter should be equal to or slightly less than the pin diameter (slightly less than or equal to 5mm / 0.2in); Please determine the size you need before purchase.
[amz_corss_sell asin=”B0B24Q1Q9L”]